You have no items in your shopping cart.
With the government-issued lockdown and restrictions due to COVID-19, product shipments will be delayed. We appreciate your cooperation and are looking to serve you at the earliest.
Show moreShow Less
- Plate Rack (cm)Yes (50 x 50)
- Flat Rack (35 x 35 cm)Yes, (50 x 50)
- Tray Rack (cm)Optional, (60 x 50)
- Cultery ContainerYes
- Fill HoseYes
- Drain HoseYes
Show moreShow Less
- Dimension (cm)70 x75.5 x 157
- Cycles (secs)3 ( 60 - 90 - 120 )
- Door ConstructionFull double wall
- Door Opening (cm)46
- Electrical Connection (V/Hz/ph)400/50/3
- General ConstructionFull double wall
- Max glass height (cm)45
- Rack Size (cm)60 x 50
- Water Consumption (L/Cycle)2.0 (2.4 ProGlass)
Show moreShow Less
- Care Free contineous water softnerYes
- Deep Drawn tank with built-in stainless steel filterYes
- Double skin insulated doorYes
- Evolution drain system and drain pumpYes
- No. of cluster programme special cycle5
- No. of standard wash programmes3
- Open boiler with break tank and rinse pumpYes
- ProClean - self cleaning systemYes
- Protect environment improvement systemYes
- Smart Screen LCD interfaceYes
- Ultra Rinse SystemYes
- Wash system with DuoFlo pump and equaliser armsYes
ProStrainer integral surface strainers are made of high-tech materials, are lighter than conventional steel filters and more resistant to chemical attack and impacts. They do not lose their shape or efficiency even if shaken or banged during cleaning, as opposed to former metal filters which tend to bend and deform, losing their filtering capacity, in a short time.
Pro Glide Hood
The hood slides smoothly on anti-friction guides and is activated by a system of levers, without buckling or jamming if the handle is grasped from a corner. The weight of the hood is counter-balanced and lifting force is reduced to a mere 3 kg, thus reducing operator fatigue and increasing productivity. The hood is of the double skin insulated type to reduce heat and noise emissions.
These machines increase the efficiency of your staff as they are designed th reduce the operator's fatigue. The design allows baskets to more more easily on the guide and the doors and hoods are easier to open and lift. These machines have big wash capacitites with larget internal cavity sizes but also small enough to fit easliy into any kitchen.
Conventional pumps distribute water through a T or Y connector. IFB's research has revealed that this method wastes 25-30% power. IFB Products eliminate this wastage with an innovative solution: one inlet but two outlets without any divider. This also results in a 50% reduction in noise. Effectively a 470W DuoFlo pump delivers the same performance as a conventional 650W pump. Thus, maximum efficiency is achieved along with minimum energy consumption.
Archimedes Drainage System
In a normal rinse cycle clean water is pumped into the tank. With a conventional gravity waste, the clean water floats above the heavier dirty water.This means three litres of clean water wastes one litre directly by drainage. Achimedes employs the principle of communicatin vessels to product a 67-85% increase in water used to regenerate detergent solution in the tank. The water is forced bottomwards, discharging part of the built up dairt particles. As a result, wash water soils more slowly, water referesh is less frequent and detergent concentration can be reduced by approximately by 10%.
One of the main drawbacks of conventional water softeners is that work has to be interrupted for long periods, at a frequency that depends on the hardness of the water, to "top up the salt". Care free regenerates the resins automatically and completely transparently to the user: regenerating at each cycle, scale build-up is reduced and the process is so fast that it is carried out during washing. Salt level is monitored electronically and a message on the display indicates when to top up the salt in the specific, readily accessible container inside the wash chamber.
NRG Heat Recovery System
Captures and condenses steam present after rinse. The heat recovered increases the temperature of the intake water by 25 °C. Eliminates the need for an external extraction hood, improves the working environment and also promotes considerable energy saving due to the almost 40% reduction in the rinse water temperature gradient that must be assured by the boiler.The entire process lasts only 30" at the end of the cycle and is fully automatic. Operator comfort is also enhanced as emission of saturated steam on opening the hood is eliminated.
Permits finger-tip control of glass washer main functions, a generously-sized four-digit display facilitates selection of the programs held in the memory and also displays wash and rinse temperatures and system self-diagnostic messages, to facilitate servicing, and the number for racks washed. Correct functioning of the machine can be monitored according to the colour (green, orange or red) of the Check-Bar while the Smart-Bar indicates current machine status (ready, heating, in use) and progress of the cycle.according to changes in colour and size. Functioning parameters and temperatures can be personalized and dispensers can be software-regulated, introducing the dose required directly in g/l.
*Images used are for representation purposes only